Brake fluid check
Fluid levels between the MIN and MAX lines are within the normal operating range; there is no need to add fluid. If the fluid levels are outside of the normal operating range, the performance of the system could be compromised; seek service from your authorized dealer immediately.
See also:
Hints on driving with anti-lock brakes
When the system is operating, the brake pedal will pulse and may travel further.
Maintain pressure on the brake pedal. You may also hear a noise from the system.
This is normal.
The anti-lock bra ...
Headlamp exit delay
You can set the delay time to keep the headlamps on for up to three minutes after
the ignition is turned off.
Follow the steps below to change the delay time (Steps 1 through 6 must be done
withi ...
Transmission code designations
You can find a transmission code on the Safety Compliance Certification Label.
The following table tells you which transmission each code represents.
...